Equipment & Technology

Purpose-built fleet. Professional grade.

Every platform, sensor, and software tool in our fleet is selected for a specific operational requirement. No consumer hardware. No improvised rigs.

Aircraft

Drone platforms

DJI Mavic 3 Pro

Aircraft

Tri-camera system with a Hasselblad 4/3 CMOS main sensor, 70mm telephoto, and 166mm super-telephoto. 43-minute flight time. Built for detailed visual inspections and real estate photography where image quality matters more than payload capacity.

Main sensor4/3 CMOS Hasselblad, 20MP

Telephoto70mm (3x), 166mm (7x)

Video5.1K / 50fps

Flight time43 min

Wind resistance12 m/s (Beaufort 6)

GNSSGPS + Galileo + BeiDou

Used for

Aerial PhotographyReal Estate PhotographyVisual Roof InspectionMarketing Content

DJI Mavic 4 Pro

Aircraft

Latest-generation compact platform with a 1-inch CMOS main sensor, enhanced obstacle avoidance on all axes, and AI-assisted subject tracking. Improved low-light performance and longer range telemetry for inspections in complex airspace.

Main sensor1-inch CMOS, 20MP

Video4K / 120fps, 5.1K / 60fps

Flight time45 min

Obstacle sensingOmnidirectional

TransmissionO4+ (20km)

Weight<900g (Sub-2kg CASA category)

Used for

Aerial PhotographyVisual Roof InspectionReal Estate PhotographyProgress Monitoring

DJI Matrice 350 RTK

Aircraft

Enterprise-grade heavy-lift airframe with centimetre-accurate RTK positioning. Carries interchangeable payloads (thermal, LiDAR, photogrammetry cameras) for survey and inspection work requiring georeferenced outputs. IP55 weather rating for reliable operations in rain and dust.

Max payload2.7 kg

Flight time55 min (no payload)

RTK accuracy1 cm + 1 ppm (H), 1.5 cm + 1 ppm (V)

Wind resistance15 m/s (Beaufort 7)

IP ratingIP55

Operating temp-20 to 50 degrees C

Used for

Aerial Mapping & SurveyingAsset InspectionThermal Drone InspectionLiDAR ScanningInfrastructure Inspection

Flyability Elios 3

Aircraft

Collision-tolerant indoor inspection drone enclosed in a protective cage. Operates in GPS-denied, confined environments: ceiling voids, tanks, bridge box girders, and roof cavities. SLAM-based navigation builds 3D point clouds of internal spaces without external positioning.

NavigationVisual-inertial SLAM (GPS-denied)

ProtectionFull carbon-fibre cage

Camera4K visual + thermal (optional)

LiDAROuster OS0-32 (indoor mapping)

Flight time12 min

Lighting10,000 lumen LED array

Used for

Confined Space InspectionTank & Vessel InspectionBridge Box Girder InspectionCeiling Void InspectionIndustrial Asset Inspection

Sensor Payloads

Thermal, LiDAR, and zoom payloads

DJI Zenmuse H20T

Sensor Payload

Quad-sensor payload combining a 20MP visual camera, 640x512 radiometric thermal sensor, 23x hybrid optical zoom, and a laser rangefinder. Mounts on the Matrice 350 RTK for thermal roof, facade, and solar panel inspections with spot temperature measurement to 0.1 degrees C.

Thermal resolution640 x 512 px

Thermal sensitivity<50 mK (NETD)

Zoom camera20MP, 23x hybrid zoom

Laser rangefinder3 to 1200 m

Frame rate30 fps (thermal), 30 fps (visual)

Temp range-40 to 550 degrees C

Used for

Thermal Drone InspectionSolar Panel Thermal AuditDrone Roof Inspection (thermal)Facade InspectionElectrical Infrastructure

DJI Zenmuse L2

Sensor Payload

Airborne LiDAR payload delivering 5 returns per pulse at up to 240,000 points per second. Integrates an RGB camera for colourised point clouds. Used for terrain modelling, volumetric calculation, and vegetation mapping where photogrammetry cannot penetrate canopy.

Point rate240,000 pts/s (5 returns)

Range accuracy+/- 2 cm (1 sigma)

Max range250 m at 80% reflectivity

RGB camera20MP, mech shutter

FOV70 degrees

Scan modeRepetitive, non-repetitive

Used for

Aerial Mapping & SurveyingVolumetric CalculationTerrain ModellingVegetation MappingAs-Built Verification

Processing

Photogrammetry and mapping software

Pix4D / DroneDeploy

Software

Photogrammetry and mapping software for processing aerial imagery into orthomosaics, digital surface models (DSM), 3D meshes, and volumetric measurements. Cloud-based processing with on-premise fallback for sensitive data. All survey outputs delivered in standard GIS formats.

Output formatsGeoTIFF, LAS, OBJ, DXF, SHP

AccuracySub-centimetre with GCPs

ProductsOrthomosaic, DSM, DTM, 3D mesh, contours

ProcessingCloud + on-premise options

Volume calcCut/fill with base plane or surface

Coordinate systemsMGA2020, GDA2020, WGS84, custom

Used for

Aerial Mapping & SurveyingVolumetric CalculationProgress MonitoringSite PlanningStockpile Measurement

See what our fleet can do for your project.

Tell us what you need inspected, mapped, or photographed. We will recommend the right platform and quote within 24 hours.

Request Quote